DMX / KNX rajapinta

Product number: EK-BK1-TP

The Ekinex® DMX - KNX Gateway performs a protocol conversion between a serial RS485 DMX and a KNX TP network. The device works as DMX master. The device integrates a KNX bus communication module and it is suitable for mounting on a 35 mm DIN rail; it requires an auxiliary power supply.

EK-BK1-TP key features:

Technical data:
– Power supply: 8…24 Vac or 12…35 Vdc
– Absorption at 24 Vdc: 3,5 VA

Communication KNX side:
– KNX TP (Twisted Pair) communication port electrically isolated from power supply
– 1440-byte volatile support “KNX image” memory buffer

Communication DMX side:
– RS485 serial communication port, electrically isolated from power supply, 120 ohm termination resistance pluggable by a 1-way microswitch
– DMX master communication
– Baud rate 250 kbaud
– Device addressing from 0 to 512
– 1-byte register writing on max 512 DMX devices

– Ethernet communication port (IEEE 802.3), RJ45 connector, minimum cable category: 5E


, ,

Product manual


Product info