KNX virtalähde 640 mA, 30 Vdc auxiliary output

Product number: EK-AG1-TP

The Ekinex® 640 mA KNX bus power supply supplies and monitors the 30 Vdc voltage required by the KNX bus for operation. An integrated choke provides for decoupling power supply and bus line. On a bus line powered by a 640 mA power supply unit may be connected a maximum of 64 bus devices. Output is protected from overload and short-circuit. The EK-AG1-TP version is provided with an additional 30 Vdc output can be used as auxiliary power supply for other devices requiring SELV voltage (Safety Extra Low Voltage). The total current provided by the two outputs (KNX bus line and auxiliary power supply) cannot exceed 640 mA. The device supports short network voltage interruptions (max. 200 ms).

EK-AG1-TP key features:

– Input voltage: 230 Vac, 50/60 Hz
– Power absorption 22 W
– Loss < 3 W
– Output voltage (KNX bus): 30 Vdc
– Output voltage (auxiliary output): 30 Vdc
– Nominal current (output total): 640 mA
– Buffer time: 200 ms


Product manual


Product info